PSI to Bars Converter

Convert psi to bars instantly.

Runs in your browser — nothing is uploaded

    Your result will appear here.

    Free, no account, no sign-up. Nothing is uploaded. Everything runs on your device.

    In short: Tyre gauges, weather stations and engineering datasheets all report pressure, but rarely in the same unit — this page converts pound per square inch to bar so the numbers can be compared directly. By definition, 1 psi is 0.068948 bar.

    Tyre gauges, weather stations and engineering datasheets all report pressure, but rarely in the same unit — this page converts pound per square inch to bar so the numbers can be compared directly. By definition, 1 psi is 0.068948 bar. The tool applies that exact factor to whatever number you enter, with no rounding of the factor itself. For example, 14.7 pound per square inch converts to 1.0135 bar — try it and compare. For a sense of scale, standard atmospheric pressure works out at 14.6959 psi — that is 1.01325 bar. Typical jobs include translating a hydraulic specification for a workshop job or reading a boiler or compressor gauge, where reading the wrong unit can throw a setting off. Feed the number into the box and tap Convert — the tool does the arithmetic on the spot and shows the result with its unit. A pascal is a small unit for everyday pressures, which is why gauges usually read in kilopascals or bar — a car tyre at 220 kilopascals is about 2.2 bar. No upload, no account, no sign-up: the maths runs locally in your browser and your numbers stay private.

    How to use PSI to Bars Converter

    1. Enter a value type a number into the box above.
    2. Fill in the options set the units, currencies or values the tool asks for below the box.
    3. Click Convert the maths runs entirely in your browser — nothing is uploaded.
    4. Read your result it appears below the tool.
    5. Convert another change the value or the options — no sign-up, no limits.

    Format facts

    Input formatPSI
    Output formatBar
    EngineBuilt-in browser engine
    CategoryPressure

    Frequently asked questions

    What is 1 pound per square inch in bar?

    1 psi equals 0.068948 bar. The factor is exact — one pound per square inch is defined as 0.068948 bar — so the result is exact, not an approximation.

    How do I convert pound per square inch to bar?

    Multiply the pound per square inch value by 0.068948: bar = pound per square inch × 0.068948. For example, 2.5 psi × 0.068948 = 0.172369 bar.

    What is a pound per square inch?

    Pounds per square inch is the imperial pressure unit, standard on tyre gauges and hydraulic specs in the United States.

    Is the psi-to-bars free?

    Yes — free to use, with no account, no sign-up, and no limits on how often you use it.

    Does this converter store what I type?

    No. Nothing you enter is uploaded or kept; the conversion is done on your device and forgotten when you leave the page.