Bars to PSI Converter

Convert bars to psi instantly.

Runs in your browser — nothing is uploaded

    Your result will appear here.

    Free, no account, no sign-up. Nothing is uploaded. Everything runs on your device.

    In short: Tyre gauges, weather stations and engineering datasheets all report pressure, but rarely in the same unit — this page converts bar to pound per square inch so the numbers can be compared directly. The conversion is exact: one bar (bar) equals 14.5038 pound per square inch (psi), so the tool multiplies your value by 14.5038.

    Tyre gauges, weather stations and engineering datasheets all report pressure, but rarely in the same unit — this page converts bar to pound per square inch so the numbers can be compared directly. The conversion is exact: one bar (bar) equals 14.5038 pound per square inch (psi), so the tool multiplies your value by 14.5038. Take 7 bar as an example: the tool gives 101.526 psi, using the exact definition above. As a reference point, a car tyre's pressure equals 2.2 bar (31.9083 psi). Typical jobs include converting a dive-tank pressure before a dive or matching a regulator setting to its datasheet, where reading the wrong unit can throw a setting off. Put the number in the box, hit Convert, and read off the answer — decimals work just as well as whole numbers. Pressure is force spread over an area — one pascal is one newton per square metre — so the same push reads very differently depending on which unit the gauge uses. Everything runs in your browser, so the number you type never leaves your device, and there is no account or sign-up.

    How to use Bars to PSI Converter

    1. Enter a value type a number into the box above.
    2. Fill in the options set the units, currencies or values the tool asks for below the box.
    3. Click Convert the maths runs entirely in your browser — nothing is uploaded.
    4. Read your result it appears below the tool.
    5. Convert another change the value or the options — no sign-up, no limits.

    Format facts

    Input formatBar
    Output formatPSI
    EngineBuilt-in browser engine
    CategoryPressure

    Frequently asked questions

    What is 1 bar in pound per square inch?

    1 bar equals 14.5038 psi. The factor is exact — one bar is defined as 14.5038 pound per square inch — so the result is exact, not an approximation.

    How do I convert bar to pound per square inch?

    Multiply the bar value by 14.5038: pound per square inch = bar × 14.5038. For example, 2.5 bar × 14.5038 = 36.2594 psi.

    What is a bar?

    A bar is exactly 100,000 pascals, close to standard atmospheric pressure, and widely used for tyre, boiler and compressor gauges.

    Is the bars-to-psi free?

    Yes — free to use, with no account, no sign-up, and no limits on how often you use it.

    Is my number sent to a server?

    No — everything happens locally in your browser, so the value you type is never sent to a server or saved anywhere.