Liters per second to Cubic meters per hour Converter
Convert liters per second to cubic meters per hour.
- Runs in your browser No upload — everything runs on your device.
- No sign-up, no watermark Free to use, no account needed.
- Files never uploaded Nothing leaves your device.
- 5,400+ tools, one site File, unit and currency tools in one place.
In short: Pumps, taps and irrigation plans quote flow per second, per minute or per hour, and in litres or gallons — this page converts litres per second to cubic metres per hour so the rates can be compared. One litres per second is defined as 3.6 cubic metres per hour, a fixed ratio the tool applies directly — there is no table to look up and no estimate involved.
Pumps, taps and irrigation plans quote flow per second, per minute or per hour, and in litres or gallons — this page converts litres per second to cubic metres per hour so the rates can be compared. One litres per second is defined as 3.6 cubic metres per hour, a fixed ratio the tool applies directly — there is no table to look up and no estimate involved. For example, 2 litres per second converts to 7.2 cubic metres per hour — try it and compare. Typical jobs include estimating how long a tank takes to fill or drain or reading a water-meter or utility specification, where reading the wrong unit can throw a setting off. Feed the number into the box and tap Convert — the tool does the arithmetic on the spot and shows the result with its unit. A gallon on this page is the US gallon, exactly 3.7854 litres. The imperial gallon is larger, about 4.546 litres, so check which gallon your source uses before trusting a gallons-per-minute figure. It is free and private by design: the calculation runs on your device, with no server involved and no sign-up step.
How to use Liters per second to Cubic meters per hour Converter
- Enter a value type a number into the box above.
- Fill in the options set the units, currencies or values the tool asks for below the box.
- Click Convert the maths runs entirely in your browser — nothing is uploaded.
- Read your result it appears below the tool.
- Convert another change the value or the options — no sign-up, no limits.
Format facts
| Input format | Liter per second |
|---|---|
| Output format | Cubic meter per hour |
| Engine | Built-in browser engine |
| Category | Volume Flow |
Frequently asked questions
What is 1 litres per second in cubic metres per hour?
1 L/s equals 3.6 m³/h. The factor is exact — one litres per second is defined as 3.6 cubic metres per hour — so the result is exact, not an approximation.
How do I convert litres per second to cubic metres per hour?
Multiply the litres per second value by 3.6: cubic metres per hour = litres per second × 3.6. For example, 12 L/s × 3.6 = 43.2 m³/h.
Which gallon does this converter use?
The US gallon, exactly 3.7854 litres. The imperial gallon is larger, about 4.546 litres, so a gallons-per-minute figure from a UK source will not match a US one until it is converted.
Is the liters-per-second-to-cubic-meters-per-hour free?
Yes — free to use, with no account, no sign-up, and no limits on how often you use it.
Does my number get uploaded anywhere?
No. The conversion runs entirely in your browser on your own device, so your number never leaves the page and is never stored or shared.
Was this tool helpful?
Thanks — your feedback helps us improve this tool.
Sorry it didn’t help — tell us what went wrong and we’ll fix it.