inHg to Torr Converter

Convert inhgs to torrs instantly.

Runs in your browser — nothing is uploaded

    Your result will appear here.

    Free, no account, no sign-up. Nothing is uploaded. Everything runs on your device.

    This page turns inches of mercury into torr using the defined relationship between the two units, so the answer is exact rather than approximate. An inch of mercury equals 3386.39 Pa, the mercury-column unit scaled to inches. A torr equals 101325/760 Pa by definition, the pressure that supports a one-millimetre mercury column at standard conditions. One inch of mercury is 25.4 torr — and 50 inches of mercury works out to 1270 torr by the same factor. Aviation weather reports in the United States give altimeter settings in inches of mercury. Laboratory vacuum gauges read in torr, especially in older American equipment. An altimeter setting of 29.92 inHg is standard sea-level pressure, 101325 Pa — a handy check figure for this conversion. Free to use as often as you like, with the calculation done entirely in your browser and nothing sent anywhere.

    How to use inHg to Torr Converter

    1. Enter a value type a number into the box above.
    2. Fill in the options set the units, currencies or values the tool asks for below the box.
    3. Click Convert the maths runs entirely in your browser — nothing is uploaded.
    4. Read your result it appears below the tool.
    5. Convert another change the value or the options — no sign-up, no limits.

    Format facts

    Input formatinHg
    Output formatTorr
    EngineBuilt-in browser engine
    CategoryPressure

    Frequently asked questions

    What is 1 inch of mercury in torr?

    1 inHg equals 25.4 Torr. The factor is exact — it follows from the definitions of the two units — so the result is exact, not an approximation.

    How do I convert inches of mercury to torr?

    Multiply the inches of mercury value by 25.4: torr = inches of mercury × 25.4. For example, 2.5 inches of mercury × 25.4 = 63.5 torr.

    What is a inch of mercury?

    The inch of mercury is defined as 3386.39 Pa, 25.4 times the conventional millimetre of mercury. American pilots set altimeters to a pressure given in inches of mercury, such as 29.92 inHg at sea level.

    Does this converter use gauge or absolute pressure?

    Absolute pressure. The conversion applies to absolute values; if you have a gauge reading, add the local atmospheric pressure to it first, then convert.

    Is the converter free?

    Yes — free to use, with no account, no sign-up, and no limits on how often you use it.

    Is my number sent to a server?

    No — everything happens locally in your browser, so the value you type is never sent to a server or saved anywhere.