Roof Pitch Calculator

Work out a roof's pitch with this free roof pitch calculator.

Runs in your browser — nothing is uploaded

Choose the units or currencies below, then convert. The maths runs on your device.

    Your result will appear here.

    Free, no account, no sign-up. Nothing is uploaded. Everything runs on your device.

    Work out a roof's pitch with this free roof pitch calculator. Enter the rise and the run in inches and the tool gives the pitch as rise per 12 inches of run, the angle in degrees, and the slope as a percentage. A 6 inch rise over a 12 inch run is a 6/12 pitch, a 26.57 degree angle and a 50 percent slope. Pitch matters because it decides which roofing materials are allowed — very low pitches need sealed membranes rather than shingles — and how much material a roof takes, since steeper roofs have more surface area than their footprint. Measure the rise and run from inside the attic, along a rafter, or from the eaves to the ridge using a level and a tape. The tool uses the inches you enter, so keep both measurements in the same unit. If you only know the angle, work backwards: a 30 degree roof is about a 6.9/12 pitch. The calculation runs entirely in your browser, so nothing you type is uploaded or stored.

    How to use Roof Pitch Calculator

    1. Enter a value type a number into the box above.
    2. Fill in the options set the units, currencies or values the tool asks for below the box.
    3. Click Convert the maths runs entirely in your browser — nothing is uploaded.
    4. Read your result it appears below the tool.
    5. Convert another change the value or the options — no sign-up, no limits.

    Format facts

    InputA number, plus the options below the box (units, currencies or values).
    EngineBuilt-in browser engine
    CategoryCalculators

    Frequently asked questions

    What does 6/12 pitch mean?

    The roof rises 6 inches for every 12 inches of horizontal run. It is the standard way roofers describe pitch, and it equals a 26.57 degree angle.

    Why does pitch matter for materials?

    Very low pitches cannot use shingles — water does not run off fast enough — and need sealed membranes instead. Steeper roofs also have more surface area than their footprint.

    How do I measure rise and run?

    From inside the attic along a rafter, or from the eaves to the ridge with a level and a tape. Keep both measurements in inches.

    Is the roof pitch calculator free?

    Yes — free to use, with no account, no sign-up, and no limits on how often you use it.

    Does my number get uploaded anywhere?

    No. The calculation runs entirely in your browser on your own device, so your numbers never leave the page and are never stored or shared.