Fence Calculator

Work out the posts and panels for a fence with this free fence calculator.

Runs in your browser — nothing is uploaded

Choose the units or currencies below, then convert. The maths runs on your device.

    Your result will appear here.

    Free, no account, no sign-up. Nothing is uploaded. Everything runs on your device.

    Work out the posts and panels for a fence with this free fence calculator. Enter the total fence length in feet and the tool counts the posts at the default 8 foot spacing — one more post than the number of gaps — plus the number of 8 foot panels. A 100 foot fence needs 14 posts and 13 panels. Corners, ends and gate posts need extra strength, so count them separately and consider heavier posts or concrete footings there. Gates themselves are not included in the panel count: measure each gate opening and subtract it from the total length, then add the gate hardware to your list. Sloped ground may need stepped panels or longer posts, which the straight-line count does not allow for. Rails, pickets, screws and concrete are not included — this tool counts posts and panels only. Walk the line first and mark where posts will actually go, because trees, drains and boundaries often move a post by a foot. The calculation runs entirely in your browser, so nothing you type is uploaded or stored.

    How to use Fence Calculator

    1. Enter a value type a number into the box above.
    2. Fill in the options set the units, currencies or values the tool asks for below the box.
    3. Click Convert the maths runs entirely in your browser — nothing is uploaded.
    4. Read your result it appears below the tool.
    5. Convert another change the value or the options — no sign-up, no limits.

    Format facts

    InputA number, plus the options below the box (units, currencies or values).
    EngineBuilt-in browser engine
    CategoryCalculators

    Frequently asked questions

    Why is there one more post than panels?

    Each panel spans the gap between two posts, so a run of 13 panels needs 14 posts — one at each end plus one between every pair.

    Are gates included?

    No. Measure each gate opening, subtract it from the total length, and add the gate and its hardware separately.

    Do corners need anything special?

    Yes — corner, end and gate posts carry more load, so use heavier posts or concrete footings there.

    Is the fence calculator free?

    Yes — free to use, with no account, no sign-up, and no limits on how often you use it.

    Does my number get uploaded anywhere?

    No. The calculation runs entirely in your browser on your own device, so your numbers never leave the page and are never stored or shared.